Displaying 21-30 of 485 results for

Voith will deliver eight electric Voith Schneider Propellers (eVSP) to the Norwegian shipping company Østensjø, thus enabling resource-saving and energy-efficient operation of the four offshore wind supply vessels. The four ships will be built in Spain and are already equipped for the application of CO2-neutral hydrogen technology.

ESPRIT by DP Technology has announced extended support for Mazak Smooth Ai CNC. ESPRIT produces machine-optimized, edit-free G-code programs, program optimization, and machine simulation for Mazak’s machine tools.

YCM Technology (USA) Inc., Carson, Calif., has announced the introduction of the “AERO” Series of next-generation, high-performance double-column, multi-axis DCV2018A/B-5AX machining centers.

So you’ve heard all sorts of good things about Swiss-style, sliding headstock CNC lathes and have been thinking about investing in one.

Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.

Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.

Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.

It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.

Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.

Horizontal machining center technology—a long-time mainstay of OEMs and Tier One contract manufacturers—has morphed into space efficient, versatile machining platforms that any high-mix job shop can benefit from.